Caller ID Service
For assistance, please visit http://www.panasonic.com/phonehelp 25
Using Caller ID service
This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to
Caller ID service of your telephone service
provider.
Caller ID features
When an outside call is being received, the
calling party’s name and telephone
number are displayed.
Caller information for the last 50 callers is
logged in the caller list by the most recent
call to the oldest.
LGenerally caller information is displayed
from the 2nd ring.
LIf the unit cannot receive caller
information, the following is displayed:
–“Out of area”: The caller dialed
from an area which does not provide
Caller ID service.
–“Private caller”: The caller
requested not to send caller
information.
–“Long distance”: The caller called
you long distance.
Missed calls
If a call is not answered, the unit treats the
call as a missed call. “Missed call” is
displayed on the handset display. This lets
you know if you should view the caller list
to see who called while you were out.
You can view the number of missed calls
by pressing {CID} (left soft key).
Note:
LIf you press {CID}, then press {OFF}
without viewing all missed calls in the
caller list, “Missed call” disappears
from the display. When you receive
another new call, it is displayed again.
Private name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name is displayed
and logged in the caller list.
Call Waiting Caller ID display
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed after you
hear a Call Waiting tone (page 18). Please
contact your telephone service provider for
details and availability of this service in
your area.

Talking Caller ID

To use this feature, you must subscribe to
Caller ID service of your telephone service
provider.
This feature lets you know who is calling
without looking at the display. When a call
comes in, the handset announces the
displayed caller’s name following every
ring. If the information does not include the
name information, the phone number is
announced.
Note:
LWhen the name announce is set to
“On(Number)”, the handset announces
the phone number rather than the name.
LName pronunciation may vary. This
feature may not pronounce all names
correctly.
LCaller ID service has a limit of displaying
letter number. If caller’s name is too
long, the handset may not be able to
display or announce the entire name.
TGA572.book Page 25 Thursday, June 8, 2006 7:03 PM