Preparation
Registering the cordless camera
Register the cordless camera to a KX-
1 Base unit:
Press and hold {INTERCOM} until the IN USE indicator flashes.
LAfter the IN USE indicator starts flashing, the rest of the procedure must be completed within 90 seconds.
2 Cordless camera:
Press PROG. (programme) on the back side of the cordless camera with a pointed object such as a pen until a beep sounds.
LWhen registration is completed successfully, the cordless camera beeps and the indicator stops flashing red but remains lit in yellow- green (page 8).
Deregistering the cordless camera
The base unit can cancel the registration of a registered cordless camera.
Important:
LBefore deregistering, confirm the cordless camera’s extension number from the handset (colour display models only:
Press {INTERCOM} on the handset to display its extension.
Base unit
1 Press and hold {INTERCOM} until the IN USE indicator flashes.
2 Press and hold the cordless camera's extension number ({1} – {8}) until a beep sounds.
Note:
LThe indicator colour on the camera remains the same.
13