Panasonic KX-TGA593AL operating instructions Troubleshooting, Problem Cause & solution

	Useful Information
Troubleshooting
Problem	Cause & solution
The cordless camera	LCheck the connections (page 9).
does not work.	LThe cordless camera is not registered to the base unit.
	Register the cordless camera to the base unit (page
	13).
The cordless camera’s	LThe cordless camera is not registered to the base unit.
indicator is flashing red.	Register the cordless camera to the base unit (page
	13).
	LThe cordless camera is out of range. Locate the
	cordless camera near the base unit.
The image is faint.	LThe camera lens is dirty. Clean it with a soft dry cloth.
	LDo not touch the lens directly. Fingerprint may cause an
	unclear image.
The image sent from the	LAdjust the display brightness setting (page 16).
cordless camera is poor	LSelect standard quality mode instead of enhanced
on the handset display.	motion mode (page 11).
	LThe place where the cordless camera is located is dark.
	Improve lighting.
The image sent from the	LAdjust the display brightness setting (page 16).
cordless camera is dark	LThere is a strong sunlight or a backlight in the place
and difficult to see on the	where the cordless camera is located. Try shading the
handset display.	camera’s location.
I cannot connect to the	LThe cordless camera has lost communications with the
cordless camera, the	base unit. Move the cordless camera closer to the base
image distorts, or the	unit, and try again.
image is slow.	LThere is an obstacle such as concrete wall. Move the
	cordless camera to the place without an obstacle.
	LA microwave appliance is in use. Move the cordless
	camera closer to the base unit or use the cordless
	camera away from that appliance, and try again.
The camera sensor does	LIf you set the audio detection sensitivity to off, the
not respond.	camera sensor does not respond. Turn this feature on
	(page 17).
	LWhile a handset is monitoring the cordless camera, the
	cordless camera stops detecting sound.

21