Y
Programming using the Handset
29
Call forward
Incoming calls can be forwarded to another party.
You can choose one of 3 modes:
–“Unconditional”: All incoming calls are
forwarded.
–“Busy”: Incoming calls while the line is in use
are forwarded.
–“No answer”: Incoming calls after a certain
number of rings are forwarded. The default
setting of the number of ring count is “3”. To
change the setting, perform “Changing the ring
count”, page 29.
Important:
LWe recommend setting with your administrator.
Contact your administrator for further
information.
LIf this feature is set on your unit, it may be
overridden by your phone system settings.
LThis feature is not available on shared lines.
LThe call is logged in the caller list (page 42) with
Q after the call is forwarded.
Turning call forward on/off
1{MENU} (center of joystick)
2{V}/{^}: “IP service” i {SELECT}
3{V}/{^}: “Call features” i {SELECT}
4{V}/{^}: “Call forward” i {SELECT}
5Proceed with the desired operation.
■When 1 line is registered:
Go to step 6.
■When 2 or more lines are registered:
{V}/{^}: Select the desired line. i
{SELECT}
6{V}/{^}: Select the desired option. i
{SELECT}
7{V}/{^}: “On/Off” i {SELECT}
8{V}/{^}: Select “On” or “Off”. i {SAVE}
LIf you select “Off”, press {OFF} to exit.
LIf the phone number forwarded to has been
already set, press {OFF} to exit. To change
the phone number, perform from step 7,
“Changing the phone number”, page 29,
then press {OFF} to exit.
9Enter the phone number you want to forward
calls to (24 digits max.). i {SAVE}
LIf you have selected “No answer”, enter
the number of rings before the unit forwards
calls (0, 2-20 rings). i {SAVE}
10 {OFF}
Changing the phone number
1{MENU} (center of joystick)
2{V}/{^}: “IP service” i {SELECT}
3{V}/{^}: “Call features” i {SELECT}
4{V}/{^}: “Call forward” i {SELECT}
5Proceed with the desired operation.
■When 1 line is registered:
Go to step 6.
■When 2 or more lines are registered:
{V}/{^}: Select the desired line. i
{SELECT}
6{V}/{^}: Select the desired option. i
{SELECT}
7{V}/{^}: “Phone number” i {SELECT}
8Enter the phone number you want to forward
calls to (24 digits max.). i {SAVE} i
{OFF}
Changing the ring count
You can change the number of rings before which
the call is forwarded if “No answer” is selected.
1{MENU} (center of joystick)
2{V}/{^}: “IP service” i {SELECT}
3{V}/{^}: “Call features” i {SELECT}
4{V}/{^}: “Call forward” i {SELECT}
5Proceed with the desired operation.
■When 1 line is registered:
Go to step 6.
■When 2 or more lines are registered:
{V}/{^}: Select the desired line. i
{SELECT}
6{V}/{^}: “No answer” i {SELECT}
7{V}/{^}: “Ring count” i {SELECT}
8Enter the number of rings before the unit
forwards calls (0, 2-20 rings). i {SAVE} i
{OFF}