Intercom Features
44 Document Version 2011-03
Intercom features between handsets
Intercom
Intercom calls can be made between handsets.
Note:
LIf you receive an outside call while talking on the
intercom, you hear interrupt tones (page 27). To
answer the call, press {OFF}, then press {C}.
LWhen paging the handset, the paged handset
beeps for 1 minute.
Making an intercom call
1{MENU} (center of joystick) i {V}/{^}:
“Intercom” i {SELECT}
2{V}/{^}: Select the desired unit. i {CALL}
LTo stop paging, press {OFF}.
3When you finish talking, press {OFF}.
Answering an intercom call
1Press {C} to answer the page.
2When you finish talking, press {OFF}.
Auto intercom/Room monitor
This feature allows you to:
– answer an intercom call without pressing any
buttons on the handset.
– listen to the sound in a room where the handset
is located.
Turning auto intercom on/off
“Off” (Default): Turns this feature off.
“On (Ringer On)”: When an intercom call is
received, the handset rings 2 times then the
speakerphone is automatically turned on.
“On (Ringer Off)”: When an intercom call is
received, the handset does not ring and the
speakerphone is automatically turned on. This
allows you to easily monitor a baby’s room, for
example, from different areas of the house.
1{MENU} (center of joystick) i
{#}{2}{7}{3}
2{V}/{^}: Select the desired setting.
3{SAVE} i {OFF}
Note:
LAuto intercom cannot be used when:
– your handset is receiving a transferred
outside call.
– all handsets are being paged by the base unit.
Answering an intercom call using auto
intercom
1When you are paged by another handset,
speak into the microphone.
LTo switch to the receiver, press {C}.
2To end the intercom, press {OFF}.
Monitoring audio in a room
You can listen to the sound in a room where
another handset is located.
Important:
LBefore using this feature, set auto intercom on
the destination handset to “On (Ringer
Off)” to allow access by other handsets.
1Call the destination handset (page 44).
LYou can listen to the audio.
2To mute your sound output, press {MUTE} if
necessary.
3Press {OFF} to stop monitoring.
Transferring calls
Outside calls can be transferred between 2
handsets.
1During an outside call, press {MENU}.
2{V}/{^}: “Intercom” i {SELECT}
3{V}/{^}: Select the desired handset. i
{CALL}
4Wait for the paged party to answer.
LIf the paged party does not answer, press
{C} to return to the outside call.
5{OFF}
Transferring a call without speaking to the
other handset user
1Perform from step 1 to 3, “Transferring calls”,
page 44.
2{OFF}
LThe outside call rings at the other handset.