Preparation
Setting up the unit before use
Date and time
1{FUNCTION} > {4} / {3}: “SET CLOCK ?” > {ENTER}
2Enter the current year by selecting 2 digits. Example: 2008
{0} {8}
≥You can set the year 2000 to 2099.
3{ENTER}
4Enter the current hour and minute by selecting 2 digits for each.
5{ENTER}
≥If numbers between 0000 and 0059, or 1300 and 2359 are entered, the time will automatically set using the
6Press {#} to select “AM”, “PM” or
Display Option
| AM |
| AM | |
|
| |||
|
|
|
| PM |
|
|
|
| |
|
|
| ||
| PM |
| ||
|
|
|
| |
|
|
|
| |
|
|
|
| |
| (Blank display) | |||
|
|
|
|
|
≥Each time you press {#}, the selection will change on the display.
Example: 9:30PM
{0} {9} {3} {0} > Press {#} until
“09:30PM” is displayed.
7{ENTER}
8Enter the current date and month by selecting 2 digits for each. Example: 15 July
{1} {5} {0} {7}
9{ENTER} > {EXIT}
≥If the date and time entered are wrong,
“ERROR” will be displayed and you cannot
continue with the setting. Enter the correct date and time.
For Caller ID service users (page 21)
If a time display service is available with the Caller ID service:
≥The Caller ID information will
s the adjusted time and/or date is incorrect. s the time adjustment set to ON.
Dialling mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “TONE”.
“TONE”: For tone dial service.
“PULSE”: For rotary/pulse dial service.
1{FUNCTION} > {4} / {3}: “SET DIAL MODE ?” > {ENTER}
2{4} / {3}: Select the desired setting >
{ENTER} > {EXIT}
Storing your area code
We recommend storing your area code before using Caller ID (page 21). Calls from the same area will be recorded in the caller list without the area code. You do not have to remove it before calling back the caller.
≥To store the caller’s information in the phonebook, you may need to remove the area code because same area code would be appeared automatically while storing.
1{FUNCTION} > {4} / {3}: “SET AREA CODE ?” > {ENTER}
2Enter your area code (8 digits max.).
Example: 092
{0} {9} {2}
≥To correct a digit, press {CLEAR}. Enter the correct number.
3{ENTER} >{EXIT}
To erase your area code
1{FUNCTION} > {4} / {3}: “SET AREA CODE ?” > {ENTER}
2{CLEAR} > {ENTER} > {EXIT}
12
