Programming
Programmable settings
You can customize the unit by programming the following features.
Make sure that the handset is on the cradle.
Programming by scrolling through the display menus
1
2
3
{FUNCTION}
{4} / {3}: Select the desired item in main menu > {ENTER}
{4} / {3}: Select the desired setting > {ENTER}
≥This step may vary depending on the feature being programmed.
≥To exit the operation, press {EXIT} or wait for 60 seconds.
Note:
≥In the following table, < > indicates the default settings.
≥The current item or setting is highlighted on the display.
Main menu | Setting |
| Page |
|
|
|
|
SAVE PHONEBOOK ? |
| j | 19 |
SET CLOCK ? |
| j | 12 |
CHANGE PASSWORD? | <1111> |
| 14 |
CALL RESTRICT ? |
| j | 14 |
SET FLASH TIME ?*1 | 900MS/700MS/600MS/400MS/ |
| |
| 300MS/250MS/200MS/160MS/ | j | |
| 110MS/100MS/90MS/80MS |
| |
| <600MS> |
|
|
SET DIAL MODE ? | TONE/PULSE | 12 | |
| <TONE> |
|
|
*2 | / | / / | j |
LCD CONTRAST ? | < > |
| |
|
|
| |
|
|
|
|
TIME ADJUSTMENT?*3 | ON/OFF |
| j |
| <OFF> |
|
|
SET AREA CODE ? |
| j | 12 |
|
|
| |
*1 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.
*2 “ ” shows one level. To make the display clearer, set to high level.
*3 If the Caller ID time and date display service is available in your area, this feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
13
