Safety Precautions Please observe safety precautions fully.
Caution
| Don't put an object or finger into the motor | Failure to heed this instruction will result in |
| opening. | electric shock or fire. |
| Don't turn off and on power so frequently. | Failure to heed this instruction will result in |
| fire, personal injury, malfunction or damage. | |
|
| |
|
|
|
| Don't pull leadwires with an excessive force. | Failure to heed this instruction will cause |
| fire, electric shock or personal injury. | |
|
| |
|
|
|
| Don't use the equipment in highly intensive | Failure to heed these instructions will |
| electric field. | |
| cause personal injury or fire. | |
|
| |
| Don't use the equipment under direct sunshine. | |
|
| |
|
|
|
| Don't use the equipment in an environment where | Induced malfunction will cause |
| malfunction or personal injury. | |
|
|
|
| Don't drop or cause topple over of something | Failure to heed this instruction will result in |
| during transportation or installation. | personal injury or malfunction. |
|
|
|
| Never attempt to perform modification, | Failure to heed this instruction will result in |
| fire, electric shock, personal injury or | |
| dismantle or repair. | |
| malfunction. | |
|
| |
|
|
|
| Perform installation by taking into |
|
| consideration the mass of the body and rated |
|
| output of the product. |
|
| Adjust the motor ambient environmental | Failure to heed these requirements will |
| condition to match the motor operating | result in personal injury or malfunction. |
| temperature and humidity. |
|
|
|
|
| Exactly follow the installing method and |
|
| direction specified. |
|
|
|
|
| Connect a | Missing of one of these devices will cause |
| and replay to the brake control relay in series so | |
| malfunction. | |
| that they are turned off upon emergency stop. | |
|
| |
|
|
|
| Operation using a wrong model or wrong | |
| loading to verify normal operation, and then | |
| wiring connection will result in personal injury. | |
| connect it to the mechanical system. | |
|
| |
| Level of input voltage to peripheral devices | Operation from a voltage outside the rated voltage |
| should correspond to the motor rated voltage. | will cause electric shock, personal injury or fire. |
|
|
|
| Provide protection device against idling of | No protection will cause personal injury, |
| ||
| damage, pollution or fire. | |
| grease leakage from gear head. | |
|
| |
|
|
|
| Don't place any obstacle object around the | Temperature rise will cause burn injury or |
| motor and peripheral, which blocks air passage. | fire. |
| Correctly run and arrange wiring. | Wrong wiring will cause personal injury or |
|
| |
| Maintenance must be performed by an | |
| electric shock. | |
| experienced personnel. | |
|
| |
|
|
|
| Always keep power disconnected when the | Improper operation will cause personal |
| power is not necessary for a long time. | injury. |
|
|
|
| Scraps must be treated as industrial waste. |
|
1. Introduction
General
Thisis a compact AC
This is designed for use in corporation with general purpose industrial devices. The product must be handled by experienced personnel familiar with the product.
<note>
When export this product, follow statutory provisions of the destination country.
Unpacking
•Proceed as follows:
¥First open the top of the packing and check the units for damage in transit.
¥Check the motor nameplate for the model number, output, No. of poles, voltage, frequency, etc.
Do not use the product if it does not meet your specification (if you dare to use it, burn injury or fire may result).
¥A
¥Gear head is optional.
¥Check a gear ratio on the nameplate. Do not use it if it does not meet your specification (if you dare to use it, you may be injuried or may have fire).
Should you find any discrepancy in the product, consult your local dealer.
English
Ð 4 Ð | Ð 5 Ð |