Panasonic MC-E761 Cord Reel Unit / Power Cord, Sliding Potentiometer, Cord reel unit

REPLACEMENT OF MAIN PARTS

(3) Sliding Potentiometer

1.Remove upper body as explained previously in paragraph

(1) “Motor”, points 1-3.

2.Take out the sliding potentiometer from its support and remove lead wires (blue and grey) from the potentiometer tabs. (Fig. 15)

NOTE: Observe the correct position of the lead wires before installing the new one.

Sliding potentiometer

Grey lead wire

Blue

lead wire

Fig. 15

3.Replace the potentiometer with a new one and connect the lead wires (blue and grey) to the potentiometer tabs.

4.Reinstall the potentiometer in its support and reassemble the remaining parts in the reverse order. (Fig. 16)

Fig. 16

•CORD REEL UNIT / POWER CORD

(1) Cord reel unit.

1.Remove upper body and cord reel ass’y as explained previously in paragraph (1) “Motor”, points 1-4.

2.Before removing the screw that fix the cord reel unit and cord reel support unwind the power cord to release the cord reel spring efficiency. Them remove the screw .(Fig. 17)

Cord reel ass’y

Fig. 17

14