Panasonic MC-UG223 manuel dutilisation Removing and Installing Lower Plate

WARNING Electrical Shock or Personal Injury Hazard

Disconnect the electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.

		CAUTION
		Moving parts! To reduce the risk of
		personal injury, DO NOT touch the
		agitator when vacuum cleaner is on.
		Contacting the agitator while it is
		rotating can cut, bruise or cause
		other injuries. Always unplug from
		electrical outlet before servicing.
		Use caution when operating near
		small children.
	Removing and Installing Lower Plate
	Latches	➢ Before servicing any parts,
Lower Plate		disconnect vacuum cleaner from
	Loquets
Plaque
	Lenguetas	electrical outlet.
inférieure
Base inferior
		➢ Place paper under nozzle anytime
		lower plate is removed to protect
		floor.
		➢ Place handle in upright position and
		turn vacuum cleaner over to expose
Two Screws		lower plate.
Deux vis		➢ Remove two (2) screws and press
Dos tornillos
		latches downward to release lower
		plate.
		➢ Remove lower plate and remove any
		residue that may exist in belt area.
		➢ Reinstall lower plate by hooking front
		end of lower plate into slots on front
		of nozzle housing.
		➢ Press lower plate into place, snap
		latches into place, and reinstall two
		(2) screws.

- 26 -