Replacing Belt
+
Lift Agitator Up
Soulever l’agitateur
Inidad del agitador
+
Install New Belt
Motor Shaft | Poser la nouvelle | |
courroie | ||
Arbre | ||
Instalaciòn de la | ||
d'entraînement | ||
correa | ||
du moteur | ||
| ||
Eje del motor |
|
➢Remove lower plate.
➢Remove agitator by carefully lifting out.
➢Remove worn or broken belt.
➢Loop new belt (Panasonic Type UB8 only) around motor shaft and belt pulley; see illustration for correct belt routing.
➢Reinstall agitator back into nozzle housing grooves.
➢After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate.
+
Groove | End Cap |
Ouverture | Bouchon |
Ranura | Tapa del extremo |
- 32 -