Replacing Headlight Bulb
+ |
Bulb Socket Assembly |
Assemblage de la lampe |
Casquillo portalámparas |
➢Remove lower plate.
➢Remove bulb socket screw, grasp the bulb socket assembly and pull upward while moving it back and forth.
➢Remove old bulb from the bulb socket assembly by pushing in while turning
➢Replace bulb by pushing in while turning clockwise.
➢Only use a bulb rated 130 V
➢Reinstall bulb socket assembly into nozzle housing by pushing it back down into slot and reinstall bulb socket screw.
➢Reinstall lower plate.
Replacing Belt
➢ Replace belt whenever a burning
+
rubber smell caused by excessive
+
+
slippage occurs.
|
| ➢ Remove lower plate. | ||
| Lift Agitator Up | ➢ | Lift rear belt cover and remove felt | |
Felt Packing | Soulever l’agitateur | |||
| packing. | |||
Unidad del agitador |
| |||
Cale en feutre |
| |||
|
|
| ||
Empaquetadura |
|
|
| |
de fieltro |
|
|
|
|
| ➢ Remove agitator by carefully lifting | |
|
| out. | |
| + |
| |
|
| ➢ Remove worn or broken belt. | |
|
| ➢ Clean agitator. | |
Motor Shaft | Install |
| |
Arbre d’entraînement | ➢ Loop new belt (Panasonic Type UB8 | ||
New Belt | |||
du moteur | |||
Poser la | only) around motor shaft and | ||
Eje del motor | |||
nouvelle | |||
| agitator pulley; see illustration for | ||
| courroie | ||
| Instalación | correct belt routing. | |
| de la correa | ||
|
| - 28 - |