WARNING Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting.
Removing and Installing Lower Plate
Three Screws
Trois vis
Tres tornillos
Lower Plate
Plaque inférieure Base inferior 
➢Before servicing any parts, disconnect vacuum from electrical outlet.
➢Place paper under nozzle anytime lower plate is removed to protect floor.
➢Place handle in down position and turn vacuum over to expose lower plate.
➢Release lower plate by removing three (3) screws.
➢Remove lower plate and remove any residue that may exist in belt area.
➢Reinstall lower plate by hooking front end of lower plate into slots on front of nozzle housing.
➢Make sure all wires are routed properly and not pinched.
➢Press lower plate into place then replace three (3) screws.
Replacing Belt
Motor Drive
Shaft
Arbre du moteur
Eje del motor 
Belt 
Courroie
Correa
Agitator
Agitateur
Agitador
➢Remove lower plate.
➢Remove agitator by carefully lifting out.
- 24 -
