Panasonic NC-EH22P, NC-EH30P, NC-EH40P the, mark, Cautions, Use to How, temperature, Press the key, • The indication, is estimated water, When the unit is not in use

Pour in water with another container. Close the lid securely.

Securely plug the body plug horizontally into the body.Plug into wall outlet. ( → )

Water starts	After the water has been	The boiled water
boiling	boiled, the following will	will be kept warm at
automatically.	be indicated.	approx. 190ºF (90ºC)
		automatically.
LED Flashing	LED Flashing	LED Lit

LED Lit LED Off LED Off

LEDLEDLED

• The indicationTime required to boil water (approx.)is estimated waterNC-EH40P: 35 min. / NC-EH30P: 27 min. / NC-EH22P: 20 min.temperature.(Amount of water: Maximum Water / Room temperature: 68ºF (20ºC))

Use to How

Press the keyto release lock. The indicator light beside the key will be lit.

Press key and dispense the hot water.

The “Dispense” key will be re-locked automatically in 10 seconds after you stop dispensing hot water.

Lit

When the unit is not in useUnplug, and remove the lid. Pour out any remaining hot water slowly via

the	mark.	Cautions
		● Do not pour out water too quickly.
		If water splashes over lid release part or
		operation panel, it may cause a malfunction.
	Lid release part	● Do not leave water standing in the container.
		(It may cause the container to corrode or smell.)
	Operation panel

17