Panasonic NN-GT546W manual Timer Setting, To use as a Kitchen Timer Example To count 5 minutes

IP0534_38G70KP_Eng_0630 2006.6.30 10:56 Page 6

Timer Setting

English

This feature allows you to program standing Time after cooking is completed and to program the oven as a minute or a second timer or program delay start.

To use as a Kitchen Timer: Example: To count 5 minutes

				5 times
1. Press.			2. Set desired amount of time.			3. Press.
			(up to 99 minutes and 99			Time counts down without
			seconds)			operating oven.
To Set Standing Time:
	Example: To stand for 5 minutes after cooking (3 mins. at Medium)
		3 times			5 times

1. Press 3 times.	2. Press 3 times.	3. Press.	4. Press 5 times.
Set the desired			Set desired amount
cooking program.			of starting time.
(See page 5 for			(Up to 99 minutes
directions.)			and 99 seconds.)

5.Press.

Cooking starts. After cooking, standing time will count down without operating oven.

To Set Delay Time:

Example: To start cooking 5 minutes later (3 mins. at Medium)

5 times

3 times

1. Press.	2. Press 5 times.	3. Press 3 times.	4. Press 3 times.	5. Press.
	Set desired amount	Set the desired		Delayed time counts
	of delay time.	cooking program.		down. The cooking will
	(up to 99 minutes	(See page 5 for		start.
	and 99 seconds)	directions.)

NOTE:

1.If oven door is opened while Standing Time, Delay Time or Kitchen Timer has been set, the time in the display window will continue to count down.

2.Delay Time and Standing Time can not be programmed before any Auto control Function. This is to prevent the standing tem- perature of the food from rising before defrosting or cooking begins. A change in the starting temperature could cause in accurate results.

3.When using Standing time or Delay time, it's up to 2 Micro Power stages.

- En-6 -