Panasonic NN-S961 manual Setting, To Set Delay Start, To Use as a Kitchen Timer, To Set Stand Time

[Timer

This feature allows you to program a Standing Time after cooking is completed and to program the oven as a kitchen timer and/or to program a delay start.

Setting]

To Set Delay Start:

_Exampie: To start cooking 5 minutes later. (3 mins. a_[P6-MEDI- UM Power).

To Use as a Kitchen Timer:

		I
I Example: To count 5 minutes
1.	_	• Press.
2.		• Set desired amount of

time using number pads. (up to 99 minutes and 99 seconds).

• Press.

>*Time will count down without oven

operating.

To Set Stand Time:

Example: To stand for 5 mins. after cooking_(3 mins. at P6- MEDIUM Power)

.

V

,

Start

NOTES:

•Press.

•Enter desired amount of delayed time using

number pads. (up to 99 minutes and

99 seconds)

•Enter the desired cooking program (see page 8 for direc- tions).

•Press.

>-Delayed time will count down. Then

cooking will start.

1.	_	•	Enter the desired
			cooking	program
			see page 8 for
	4 times		d rect ons).
	V
2.	_	•	Press.
3.		• Set desired			amount
			of Stand	Time using
			number	pads. (up to
			99 minutes		and 99
			seconds)
		• Press.
			_Cooking		will start.
			After cooking,
			stand	time		will
			count	down		without

oven operating.

1.When each stage finishes, a two beep signal sounds. At the end of the program, the oven will beep five times.

2.If oven door is opened during Stand Time

or Kitchen Timer, the time on the Display Windowwill continue to count down.

3.Stand time and Delay time cannot be programmed before any Auto Controt Function. This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change in starting temperature could cause inaccu- rate results.

14