Insert Editing
The Insert Editing function lets you substitute a part of a previously made recording by inserting one or several new scenes together with new sound. This editing method lets you precisely set the end point, and the recording will stop automatically when this point is reached. This editing method also ensures smooth,
12
0:00.00
43
INSERT
Operations
1Press the PAUSE/STILL button c on this VCR and then use the Shuttle Ring [ or Jog Dial Z to search for the tape position at which you want the insert recording to end.
2Press the RESET button = to reset the tape counter displayed on the VCR display to “0:00.00”.
3Use the Shuttle Ring [ or Jog Dial Z to search for the tape position at which you want the insert editing to start.
4Press the INSERT button X to put this VCR in the recording pause mode.
–The new sound will be recorded on the
–In case you also want to record the new sound on the normal (mono) audio track, press the A.DUB button ^. The indication on the On Screen Display changes to [AV INSERT].
6 | INSERT |
|
| 5 Start playback on the source unit and search for the |
0:00.00 | ||||
beginning of the scene that you want to dub (copy) onto this VCR.
Preparations
–Connect a movie camera or another VCR to this VCR as shown in the illustration on page 18.
–Display the VCR picture on the TV.
–Insert the cassette onto which you want to perform insert editing and make sure that its erasure prevention tab is intact.
–Set the VCR/TV switch E to [VCR].
–Select the audio source required by pressing the INPUT SELECT button K to set A1 or A2.
A1: | When connected to the AV1(AUDIO IN/VIDEO |
| IN) sockets. |
A2: | When connected to the AV2 (AUDIO IN/VIDEO |
| IN) sockets on front panel. |
–Use the L and R connectors for operations in the normal (monaural) mode.
6When you have found that point, press the PAUSE/STILL button c on this VCR again to start recording the new part from the playback unit.
–When the tape counter displayed on the On Screen Display becomes “0:00.00”, recording automatically stops, and this VCR stops in the recording pause mode.
–To edit additional scenes, repeat operation steps 1 to 6.
7Press the Stop button F on this VCR to finish editing.
Note:
–Insert editing cannot be performed on blank sections of a tape. In such case, perform recording from an external source. (See page 18.)
27
