Panasonic NV-FJ720 To Stop Playback Automatically Playback Off Timer Function, Ntsc Playback

To Stop Playback Automatically (Playback Off Timer Function)

If you set the playback duration, the playback will stop automatically.

After the set playback time has elapsed, the VCR automatically stops playback and switches off.

To Activate the Playback Off Timer Function:

During normal playback, press the Play button 7 on the VCR for more than 2 seconds to put the VCR in the Playback Off Timer mode.

After that, press the Play button 7 on the VCR repeatedly until the desired playback duration is displayed on the VCR display.

–Repeatedly pressing this button changes the indication in the following order:

Counter display		30	60
(normal playback mode)		(min.)	(min.)
240	180	120	90
(min.)	(min.)	(min.)	(min.)

–The VCR will automatically switch off when Play-Off Timer is completed. To turn the VCR on again, press the POWER button 1.

Notes:

–The Play-Off Timer function works during normal playback.

–When the tape reaches its end during Play-Off Timer, the tape will be rewound to the start and the VCR will turn itself off.

To Stop Midway:

Press the Stop button F.

NTSC Playback

Tapes recorded in the NTSC system can be played back with this VCR via a PAL system TV.

–Select [NTSC PB SELECT] from the on screen display according to the colour TV system of the TV.

(See page 13.)

–NTSC 3.58 recording requires [NTSC INPUT SELECT] to be in the AUTO or 3.58 position (see page 13), however if [NTSC INPUT SELECT] is in this position when recording a NTSC 3.58 signal, no colour is available for the PAL TV. Once the recording is completed, you then need to select [on PAL TV] to view the recording in colour on PAL TV.

–On some TVs, the playback picture may roll up or down; if your TV has V-HOLD control or equivalent adjustment function, use it to adjust the picture.

Note for only NTSC Playback on PAL system TV

This function is designed to allow only the playback of tapes recorded by NTSC signals on a PAL system TV. The NTSC signal is not completely converted to a PAL signal. For this reason, images played back by this function cannot be recorded correctly on other VCRs.

To Playback in the Desired Picture Quality (Picture Mode)

This function reproduces optimum playback picture from various kind of recorded tapes and contents.

Press the PICTURE MODE button 5 and select the corresponding Picture Mode as follows.

Example:

Mode	Characteristic	Example for Purpose
STANDARD	Normal	TV Programme recorded
DYNAMIC	Clear & Vivid	Scenery, Sports
SOFT	Mild	Rental soft tape
CARTOON	Delicate	Cartoon

–Pressing the PICTURE MODE button 5 once makes the On Screen Display appear; after that, pressing it repeatedly changes the indication in the following order:

STANDARD	DYNAMIC
(Initial Setting)

CARTOONSOFT

Convenient Automatic Functions

VCR Auto Power On

When you insert a video cassette, the VCR switches on automatically.

Auto Playback Start

When you insert a video cassette with a broken erasure prevention tab, playback start automatically without having to press the Play button 7.

VCR-off Playback

When the VCR is off, an inserted cassette can be played back by pressing the Play button 7.

Auto Rewind

When the tape reaches the end, the VCR automatically rewinds it to the beginning.

–This function does not work during timer recording and OTR.

Automatic Switching Off and Ejection

When the VCR is switched off, an inserted cassette can be ejected simply by pressing the EJECT button W. The VCR will eject the cassette and automatically turn itself off again.

VCR-off Search

When the VCR is off, the VCR starts intro-jet scan of an inserted cassette by pressing the SEARCH button 6.

To Eject Video Cassette Using the Remote Control

Keep pressing the Stop button F for at least 3 seconds.

15