Playback mode
28
LSQT1008
Playback mode

Playing back tape

≥Set to Tape Playback Mode.
(An operation icon automatically appears on
the LCD monitor.)
1Operate with joystick.
1/;: Playback/Pause
6: Rewind/Review playback (Reverts to
playback with the 1/; icon.)
5: Fast forward/Cue playback (Reverts to
playback with the 1/; icon.)
∫:Stop
≥The power will not turn off when the LCD
monitor and the viewfinder are closed and
retracted during Tape Playback Mode.
≥During cue/review playback, fast-moving
images may show noise as a mosaic.
≥Before and after cue/review playback, the
screen may become black for a moment or
images may be disturbed.
ªTo adjust volume
Adjust the speaker volume for playback.
1Move the [sVOLUMEr] lever to adjust the
volume.
Towards [r]: increases the volume
Towards [s]: decreases the volume
(Nearer the bar to [r], larger the volume.)
≥When the adjustment is completed, the volume
indication will disappear.
≥If you do not hear the sound, check the settings
of [SETUP] >> [12bit AUDIO].
ªRepeat playback
When the tape end is reached, the tape will be
rewound and played back again.
1Set [ADVANCED] >> [REPEAT PLAY] >>
[ON].
≥The [ ] indication appears. (In order to
cancel the repeat playback mode, set
[REPEAT PLAY] >> [OFF] or turn off the
power.)
ªSettings on the audio
≥If you cannot listen to the desired audio when
playing back a tape, check the settings in
[SETUP] >> [12bit AUDIO].
≥When you record the audio in [12bit] and set
[SETUP] >> [12bit AUDIO] >> [MIX], the audio
will be played back in stereo sound regardless
of the settings in [AUDIO OUT].
VOLUME
W
T
LSQT1008ENG.book 28 ページ ２００６年１月１８日　水曜日　午前１０時４分