Before using
17
LSQT1006
ªOperating with remote control
(NV-GS37 only)
The menu screen transition is the same as when
the buttons on the main unit are used.
1Press the [MENU] button.
2Select a menu item.
≥Use the direction buttons (3,2,1,4) and
[ENTER] button in place of the joystick on the
main unit.
3Press the [MENU] button to exit the menu
screen.
Adjusting LCD monitor/viewfinderªAdjusting the brightness and colour
level
1Set [SETUP] >> [LCD SET] or [EVF SE T] >>
[YES].
2Move the joystick up or down in order to
select the item to be adjusted.
[LCD SET]
: Brightness of the LCD monitor
: Colour level of the LCD monitor
[EVF SET]
: Brightness of the viewfinder
3Move the joystick left or right to move the
bar indication representing the brightness.
4Press the [MENU] button or the joystick to
complete the settings.
≥When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
≥To adjust the brightness of the viewfinder, close
the LCD monitor and extend the viewfinder to
activate it.
≥These settings will not affect the images actually
recorded.
≥If you adjust the colour level of the LCD monitor,
the colour level of the viewfinder also
automatically changes. (NV-GS37 only)
EVF
LSQT1006ENG.book 17 ページ ２００５年１２月９日 金曜日 午前１１時１７分