Playback mode
33
LSQT1006
Playback on TV
Images recorded by this camera can be played
back on a TV.
≥Insert a recorded tape into this camera.
1Connect the movie camera and a TV.
≥Connect the movie camera and a TV by using
the AV cable 1.
≥If your TV is not equipped with AV Input
Sockets, the 21-pin Adaptor (purchase
separately) is necessary. Consult your dealer.
2Turn on this camera and set the mode dial
to the Tape Playback Mode.
3Select the input channel on the TV.
4Move the joystick up to select the [1/;]
icon to start playback.
≥The image and audio are output on the TV.
5Move the joystick down to select the [∫]
icon to stop playback.
≥Use the AC adaptor to free you from worrying
about the battery running down.
ªIf the image or audio from this camera

is not output on the TV

≥Check that the plugs are inserted as far as they
go.
≥Check the [12bit AUDIO] settings. (-35-)
≥Check the connected terminal.
≥Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
ªTo display the on-screen information
on the TV (NV-GS37 only)
The information displayed on the LC D monitor or
the viewfinder (operation icon, time code and
mode indication, etc.) can be displayed on the TV.
(This operation is only available when using
the remote control.)
1Press the [EXT DISPLAY] button on the
remote control.
≥Press the button again to erase the
information.
1
[VIDEO IN]
[AUDIO IN]
A
/
V
LSQT1006ENG.book 33 ページ ２００５年１２月９日　金曜日　午前１１時１７分