Edit mode
34
LSQT1006
Edit mode

Copying onto a DVD recorder or a

VCR (Dubbing)

Pictures recorded by the movie camera can be
stored on a DVD-RAM or other such media. Refer
to the instructions for the recorder.
≥Place a recorded cassette in the movie
camera, and an unrecorded DVD-RAM or
cassette in the DVD recorder or VCR.
1Connect the movie camera and the
recorder.
Connecting with the AV cable
≥Connect the movie camera and the recorder
by using the AV cable 1.
≥If your recorder is not equipped with AV Input
Sockets, the 21-pin Adaptor (purchase
separately) is necessary. Consult your dealer.
Connecting with the optional DV cable
(Only for equipment with a DV terminal)
2Turn on the movie camera and set to Tape
Playback Mode.
3Select the input channel on the TV set and
recorder.
4Move the joystick up to select the [1/;]
icon to start playback. (Player)
≥The image and sound are reproduced.
5Start recording. (Recorder)
6Stop recording. (Recorder)
7Move the joystick down to select the [∫]
icon to stop playback. (Player)
≥For more information, refer to the operating
instructions for your TV set and recorder.
≥When you do not need functional indications or
date and time indication, set [BASIC] >>
[DATE/TIME] >> [OFF] in the Tape Playback
Mode and press the [EXT DISPLAY] button on
the remote control for no indication.
(When you connect the movie camera and a
recorder with the DV cable, these indications
may not appear.)
ªWhen neither image nor sound from

the movie camera is output to the TV

set

≥Check that the plugs are inserted as far as they
go.
≥Check the [12bit AUDIO] settings. (-35-)
≥Check the connected terminal.
1
[VIDEO IN]
[AUDIO IN]
A
/
V
2
(L2)
(L2)
S
/
DV
LSQT1006ENG.book 34 ページ ２００５年１２月９日　金曜日　午前１１時１７分