Panasonic panasonic Adjusting the hand strap

Using the AC adaptor

Installation

1Connect the DC cord to the AC adaptor.

2Plug the AC cord into the power outlet.

3Insert the DC cord’s battery connector until it clicks into place.

DC cord’s battery connector

Removal

1Turn the POWER/MODE switch <OFF> (Page 27), and confirm that the mode lamp is off.

2Remove the DC cord’s battery connector while pressing the battery release button.

3Disconnect the AC cord from the power outlet.

••The battery cannot be recharged when a DC cord is connected to the AC adaptor.

••Disconnect the AC cord from the power outlet when this device is not in use.

CAUTION:

•This apparatus can be operated at a volt- age in the range of 110 – 240 V AC. Voltages other than 120 V are not intended for U.S.A. and Canada.

Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for as- sistance in selecting an alternate AC plug.

Adjusting the hand strap

Adjust the hand strap to suit your hand.

1Open the cover and adjust the length of the strap.

2Close the cover.

••Make sure that the cover is firmly closed.

24