Setting the calendar

The [CLOCK SET] value is recorded in the contents (clip) and affects the playback sequence of the thumbnails. Before shooting, be sure to check/set the [TIME ZONE] and [CLOCK SET]. This section will explain the steps on how to set the calendar to September 22, 2011, 17:20.

1Turn the camera’s POWER/MODE switch <ON>. (Page 27)

2Press the <MENU> button.

•Menu operation (Page 28)

•Operations can also be performed using buttons on the remote control that correspond to those on the camera. For details, see “Remote control” (Page 21).

3Select the [TIME ZONE] item on the setup menu [OTHER FUNCTIONS] screen and press the OPERATION lever (or tilt it to the <> direction).

4Since pressing the OPERATION lever will display the settings screen, tilt the

OPERATION lever in the <><> directions to set the time difference from Greenwich Mean Time, then press the OPERATION lever again.

Factory default setting is [0:00].

5Tilt the OPERATION lever in the <> direction and select [YES] in the [CLOCK SET] item on the setup menu [OTHER FUNCTIONS] screen.

6Tilt the OPERATION lever in the <><> directions to set to [2011].

7Tilt the OPERATION lever in the <> direction to change to the next item, then tilt

the lever in the <><> directions to set to [SEP].

30