Switching the projector on/off, Power cord | Panasonic PT-AE3000U

Switching the projector on/off

Power cord

Connecting

Disconnecting

1.Make sure the shape of the power plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.

1.Unplug the power cord from the wall outlet.

2.Depress the latch and slide the cover off.

2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.

Rail guide

3.Place the latch to the latch catcher and press until it clicks.

Latch

3.Slide the power cord secure lock up along the side guide rail and remove.

Rail guide

4.Hold the plug and unplug the power cord from the AC IN terminal on the back of the projector.

Latch

4. Connect the power cord to a wall outlet.

NOTE:

•Do not use other than the provided power cord.

•Ensure all the input devices are connected and turned off before connecting the power cord.

•Do not force the connector as this may damage the projector and/or the power cord.

•Dirt or dust build-up around plugs may cause fire or electrical hazards.

•Switch off the power to the projector when not in use.

Basic Operation

ENGLISH - 19

Image 19

Panasonic PT-AE3000U manual Switching the projector on/off, Power cord, Connecting, Connect the power cord to a wall outlet

Contents

Operating Instructions Dear Panasonic Customer Important Safety Notice Panasonic Important Safety NoticeDeclaration of Conformity Model Number PT-AE3000U Trade Name Contents Lens Control ContentsMenu Navigation Picture menu Precautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Do not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Use only the specified batteries Liquid crystal panel Projector may be subject to electromagnetic interferenceOrder to get the best picture quality Do not touch the surfaces of the lens with your bare hands Power cord secure lock AccessoriesRemote control for Safety cable Lens cover Power cord About Your Projector Remote control About Your Projector Projector bodyTop and front view Component About Your Projector Back and bottom viewComputer Hdmi Calculation methods for screen dimensions Setting upScreen size and throw distance Mounting on the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection method Vertical shift Adjusting the lens shift dialsLens shift and positioning Horizontal shift 100% Setting up Projector location rangeWhen the screen position is fixed When the projector position is fixed Connections Before connecting to the projectorConnecting example Component IN/S-VIDEO Connecting example Hdmi IN/COMPUTER Connect the power cord to a wall outlet Switching the projector on/offPower cord Connecting Switching the projector on/off Power indicatorPower indicator informs you the status of the power Switching off the projector Switching on the projectorPress the power or Enter button Projecting an image Selecting the input signalSwitch on the connected devices Adjust the focus and the projected image size Adjusting the image Remote control operationManaging the lens control settings Switching the picture mode Remote control operation Loading a saved settingSwitching the aspect ratio Adjusting the signal condition with a waveform Contrast G/CONTRAST B Adjustment exampleAdjusting with luminance options Adjusting with RGB options Managing stored logs Setting your own color profileAdjusting the selected color Create a new profile Loading saved profiles Saving a log setting as a profileDeleting the saved profiles Changing the profile names Capturing an image Resetting to the factory default settingsSwitching the input signal Using the assigned function as shortcut Displaying the main menu Adjusting with the bar scale itemsMenu Navigation Navigating through the Menu Menu Navigation Main menu and sub-menu Language Lens Control Picture menu Waveform Monitor Color TemperatureSplit Adjust Dynamic Iris NR Noise Reduction Adjusting the image in a split window Standard xvYCC Color Memory Edit Signal ModeMemory Save Memory Load DOT Clock Clock PhasePosition menu Position FIT Component signalsPosition menu Aspect ratio options and projection example Zoom Keystone Auto SetupWSS Over Scan Lens Memory Save Adjust ZOOM/FOCUS, H-AREA PositionZOOM/FOCUS Lens Memory Load Select Lens Memory Name Change and press the Enter button You can edit named lens memory settingsLens Memory Edit Area Position Assignable functions Underlined item is factory default settingButton Blank function Option menu Sleep InstallationHigh Altitude Mode Lamp Power Temp indicator Temp and Lamp IndicatorsManaging the indicated problems Lamp indicator Cleaning the projector Care and Replacement Before replacing the lamp unit Care and ReplacementWhen to replace the lamp unit Replacing the lamp unit Resetting the Lamp Runtime Care and Replacement Removing and replacing the lamp unitAttaching the top cover Troubleshooting Dots *1 MHz KHz List of compatible signalsTechnical Information Quality *2 Serial terminal Control commands Technical Information Communication settings Inquiry commands Specifications Hdmi VideoComputer Component Installing the safety cable Ceiling mount bracket safeguardsLoop twice Loop once Trademark acknowledgements DimensionsUnit mm Index Index