Setting up
Installation options (optional)
You can install the projector on the ceiling using the optional ceiling mount bracket (Product No.:
zzUse only ceiling mount brackets specified for this projector.
zzFor details on installation of the projector with the bracket, refer to the installation manual for the ceiling mount bracket.
Attention
zzTo ensure the projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or a qualified technician.
Adjusting adjustable feet
The adjustable feet can be extended by turning it as shown in the figure. It is retracted by turning it in the opposite direction. This finely adjusts the height and tilt of the projected image.
When the adjustable feet are extended, the projector can be tilted to a maximum of 2.8°. (The projection angle can be adjusted vertically.)
Getting Started
Attention
zzHeated air is blowing out from the air exhaust port while the lamp is on. Do not touch the air exhaust port directly when adjusting the adjustable feet.
zzIf the keystone effect occurs in the projected image, perform [Keystone] ( page 67) from the [Screen] menu.
Note
zzDo not extend the adjustable feet beyond the red line. Adjustable feet may fall off.
zzThe vertical and horizontal position of the image can be adjusted using the lens shift function.
ENGLISH - 35