Installing an input moduleInstalling an(optional)in ut modu e (optional)

Installing an input module

■■Types of input modules

Purchase an input module (optional) matching the input signals of the system.

Module name

SD/HD-SDI input module

Module number

ET-MD16SD1

Input/output

BNC input 2 systems, BNC output 1 system

terminal

 

 

SMPTE259M-C standard:

 

480-60i (59.94 Hz*1), 576-50i (50 Hz)

 

SMPTE260M standard:

Compatible

1035-60i (60/59.94 Hz*1)

SMPTE274M standard:

signal format

1080-24psf (48/47.95 Hz*1), 1080-24p (24/23.98 Hz*1), 1080-25psf (50 Hz), 1080-25p (25

 

Hz), 1080-30psf (60/59.94 Hz*1), 1080-30p (30/29.97 Hz*1), 1080-50i (50 Hz), 1080-60i

 

(60/59.94 Hz*1)

 

SMPTE296M standard:

 

720-60p (60/59.94 Hz*1), 720-50p (50 Hz)

*1: V-sync frequency 60/59.94 Hz, 48/47.95 Hz, and 24/23.98 Hz are automatically distinguished.

Note

zzThe preceding list shows the signal formats supported by this input module. The signal formats supported by the projector differ depending on the model. For more information, please consult your dealer.

■■Installation procedure

Disconnect the power before installing the input module.

1) Remove the slot cover.

Slot cover

2) Insert the input module.

zzFirmly insert the input module into the slot, ensuring that the socket of the connection terminal engages correctly with the plug within the projector body.

Guide

Socket

Plug

3) Fix the input module in place using two screws.

Attention

zzBe sure to tighten the screws. Otherwise, the input module may fall off. zzAn improper installation may result in damage to the input module.

Getting Started

ENGLISH - 39