Connections
Tying up the cables using cable ties
Keep the cables tidy by fixing the cables connected to the terminals into the carry handle on the projector body. zzThe cable ties can be reused. (The tab can be loosened and released.)
■■Loosening the cable ties
(i)
(ii)
Tab
Started Getting
Cable tie
1)Pull the tab in the direction of arrow (i).
2)Pull the tab in the direction of arrow (ii).
zzThe loop of the cable tie will widen.
Attention
zzNote that the following points when you use the cable tie.
–Noises may occur in rare occasions.
–Do not pull the cable forcibly. Doing so may cause disconnection of the cable.
–It is recommended that you allow some slack when the cables are tied.
Caution
When connecting the projector to a computer or an external device, use the power cord supplied with the device and commercially available shielded cables.
38 - ENGLISH