ENGLISH-21
Getting started
Connections

Notes on connections

BRead the instruction manual for each peripheral device carefully before
connecting it.
BTurn off the power supply for all peripheral devices before making any
connections.
BIf the cables necessary for connection are not included with the peripheral
device or available as an option, you may need to prepare a proper cable
for the device concerned.
BIf there is a lot of jitter in the video signal, the projected image may flicker.
In such cases, it will be necessary to connect a TBC (time base corrector).
BRefer to the list on page 60 for details on compatible signals which can be
input to the projector.
BOnly one audio system circuit is available for the AUDIO IN L-R
connectors, so if you change the audio input source, you will need to
remove and insert the appropriate plugs.

Connecting to computer

RGB signal cable
(accessory)
Computer
DIN 8-pin
(male)
Computer for
control use Monitor
RGB signal cable
Refer to the accessory CD-
ROM for details on the wireless
network that is used for
controlling the projector with a
personal computer by means
of the wireless card.
(PT-LB10NTE only)
Serial adapter
(ET-ADSER : sold
separately)