38-ENGLISH
CONTRAST
This adjusts the contrast of the
picture. (Adjust the “BRIGHT”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright: Ibutton
The picture is dark: Hbutton
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: Ibutton
Dark areas are too solid: Hbutton
COLOR
(S-VIDEO/VIDEO/YPBPRonly)
The colour is too deep: Ibutton
The colour is too pale: Hbutton
TINT
(NTSC/NTSC 4.43/YPBPRonly)
This adjusts the flesh tones in the
picture.
The flesh tones are greenish:
Ibutton
The flesh tones are reddish:
Hbutton
SHARPNESS
To soften the picture details:
Ibutton
To sharpen the picture details:
Hbutton
COLOR TEMP.
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
White balance R/G/B(W-BAL R/G/B)
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colourised.
To make the selected colour lighter
:
Ibutton
To make the selected colour stronger
:
Hbutton
AI
ON
The lamp is controlled according to
the input signals to project images
with the best quality.
OFF
“AI” is disabled.

COLOR TEMP. STANDARD

[

HIGH

[

LOW

NOTE:
B“AI” is disabled when “LAMP
POWER” is set to “LOW”.
(Refer to page 45.)