Preparation
About Your Projector
ENGLISH - 15
JBack and bottom view
NOTE:
• Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause damage or injury.
• When a cable is connected to the VARIABLE AUDIO OUT, the built-in speaker will be disabled.
S-VIDEO IN
Connect a S-VIDEO signal cable.
VIDEO IN
Connect an RCA composite video
cable.
COMPUTER1 IN
Connect a computer or YPBPR
signal cable.
COMPUTER2 IN/1 OUT
Connect a computer or YPBPR
signal cable. Select INPUT or
OUTPUT in menu. (page 36)
SERIAL
See “Serial terminal” on page 47.
AUDIO IN
Connect audio cables for inputting
audio signal corresponding to
VIDEO IN, S-VIDEO IN.
COMPUTER AUDIO IN
Connect audio cables for inputting
audio signals corresponding to
COMPUTER1 IN and/or
COMPUTER2 IN/1 OUT.
VARIABLE AUDIO OUT
Connect an audio cables for
outputting audio signals to the
connected equipment.
AC IN
Connect the mains lead to supply
electronic power to the projector.
(page 20)
Air filter compartment
(page 42)
Font leg adjusters and leg adjuster buttons
(page 18)
Speaker
Burglar hook port
Attach a commercial burglar
prevention cable.
Security lock
Attach the commercial shackle lock,
manufactured by Kensington, to
protect your projector. Compatible
with the Kensington MicroSaver
Security System.
Air exhaust port
Heated air comes out of this
opening.
Air intake port
Lamp unit compartment
(page 43)