Panasonic PT-LB80NTU Switching the input signal, Capturing an image, Remote control operation

Remote control operation

Switching the input signal

You can switch the input method manually by pressing the COMPUTER, WIRELESS (PT-LB80NTU/PT-LB75NTU only) and VIDEO buttons. Press the required button several times or I H to cycle through the input methods as follows.

You can confirm the selected input method in displayed graphical input guide on the upper right of the screen. Highlighted in yellow is selected terminal. See “INPUT GUIDE” on page 34.

Pressing the COMPUTER button

COMPUTER1 COMPUTER2

Pressing the WIRELESS button

The WIRELESS button is only for PT-LB80NTU/ PT-LB75NTU.

See CD-ROM contents for more detailed information.

Pressing the VIDEO button

VIDEO S-VIDEO

Pressing the INPUT SELECT button on the projector

COMPUTER2

COMPUTER1

NOTE:

•Only when the COMPUTER2 SELECT is set to INPUT, you can switch between COMPUTER1 and COMPUTER2.

•With no signals from COMPUTER terminals, the computer connecting guidance will be displayed. See “Computer connection guidance” on page 46.

S-VIDEO

WIRELESS*1

VIDEO

*1. WIRELESS is only for PT-LB80NTU/PT-LB75NTU.

Basic Operation

NOTE:

•Switched signal may be displayed after a short interval.

•If you select an unplugged input method, the input guidance will blink on and off several times.

•See “List of compatible signals” on page 44.

•See “Connections” on page 17.

Capturing an image

Press the FREEZE button to capture the image	projector will stop. Press the FREEZE button again to
and you can see it as a still picture. While the	escape and return to the continuing image.
image is frozen, the audio sound through the

Stopping the projection temporary

You can stop the projection and audio sound	electrical power. Press the AV MUTE button again to
through the projector temporarily for saving	escape.

Resetting to the factory default settings

You can reset most of the customized settings
to the factory defaults by pressing the	NOTE:
DEFAULT button of the remote control. Display	• Some menu items are not available to reset by pressing
the required sub menu or the menu items and press the	the DEFAULT button. Adjust each menu items
DEFAULT button again.	manually.
See “Main menu and Sub-menu” on page 28.	• To reset all the settings to the factory defaults, see
	“INITIALIZE ALL” on page 36.

ENGLISH - 24