Operating Your Radio
Position Send
DSC Operation
Receiving A Position Send
When another station sends you its position in Position Send mode, the individual alarm will sound and the station’s name and position will be shown on the LCD. Press any button to turn Off the alarm and return to Standby mode.
DSC Operation
Operating Your Radio
Call Waiting
Call Waiting functions similarly to the caller ID function on your telephone. It will capture the caller’s MMSI identification number and any other data included in a DSC message.
NOTE
Standby Mode Signal
If you will be away from your radio or otherwise unable to answer calls, you can put the radio into DSC Standby mode. When in DSC Standby mode,
The call waiting memory can hold up to 20 messages. Once the memory becomes full, each new call will erase the oldest call information on a
your radio will log all calls received into its call waiting memory and respond automatically to individual calls with an UNATTENDED message. You will then be able to retrieve those calls from the call waiting memory.
NOTE
The call waiting memory can retain up to twenty (20) calls. See the following section for information on call waiting.
Standby Mode
Call Waiting
To Review Call Waiting Messages Received
While In DSC Standby Mode:
1.From Standby mode, press the Call/Set button to enter the Call Send menu.
2.Use the Up/Down buttons to scroll to CALLWAIT (call waiting).
3.Press the Call/Set button to enter the Call Waiting mode.
Standby Mode
Standby Mode
To Enter Standby Mode:
1.From Standby mode, press the Call/Set button to enter the Call Send menu.
2.Use the Up/Down buttons to select STANDBY.
3.Press the Call/Set button to enter DSC Standby mode.
The radio will then remain in DSC Standby mode until you exit from that mode.
To Exit DSC Standby Mode:
1.From DSC Standby mode, press the Call/Set button to return the radio to Standby mode.
Reviewing Messages
NOTE
The fourth line will show the type of message.
4.Use the Up/Down buttons to move from message to message in the call waiting memory.
5.Press the Call/Set button to return to Standby mode.
To Clear Messages From The Call Waiting Memory:
1. | From Standby mode, press the Call/Set button |
| to enter the Call Send menu. |
2. | Use the Up/Down buttons to scroll to CALLWAIT |
| (call waiting). |
DSC Standby Mode
68 English
3. Press the Call/Set button to enter the Call Waiting mode. |
NOTE
The fourth line will show the type of message.
4.Use the Up/Down buttons to select the message you want to delete.
5.Press and hold the Memory Scan/Memory Clear button for one (1) second or more.
Repeat steps 4 through 5 to delete additional messages.
6.Press the Call/Set button to return to Standby mode.
Nothing comes close to a Cobra® 69
