Initial Setup -Ready to Play-
EJECT |
|
POWER |
|
ACTION |
|
SELECT | SET |
•Function buttons are void during Initial Setup.
•To eject a tape during Auto Set, press EJECT on remote. Then make settings manually. (See pages
•If Auto Clock Set takes more than 30 minutes, press STOP and perform settings manually. (See pages
▲▼◄► |
|
STOP |
|
POWER | STOP |
Case 1
Settings are made automatically. When complete, this screen appears.
Case 2
If setup is incomplete, the following screen appears. Check connection of Antenna/Cable to the RF in Terminal, then try to manually set the clock as follows.
10/25/2004 MON 11:45AM
DST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
AUTO CLOCK SET
IS INCOMPLETE
PLEASE SET CLOCK BY PRESSING ACTION KEY
Initial Setup (Ready to Play)
Please make all cable or antenna connections before powering on.
Plug the unit power cord into an AC wall outlet.
Press POWER on the remote or unit. Auto channel and clock set starts.
•If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS receiver, it must be turned off.
CH AUTO SET PROCEEDING
AUTO CLOCK SET
PROCEEDING
CANCEL:STOP
a. Press ACTION on the Remote to display SET CLOCK Menu screen.
SET CLOCK
1/ 1/2004 THU 12:00AM
DST:ON
SELECT:
SET:SET
START :ACTION
b. Press ▲▼ to select the month and press SET to set. In the same manner, select and set the date, year, time, and DST (Daylight Saving Time).
•Press ◄ repeatedly to move the cursor. Press ▲▼ to make a correction.
SET CLOCK
10/25/2004 MON 11:45AM
DST:ON
SELECT:
SET:SET
START :ACTION
c. Press ACTION twice to start CLOCK and exit.
18 |
|
For assistance, please call : | |
|
