33
VCR
Operation

Set to see a recording over and over.

To turn “ON”

Press PLAY/REPEAT on the unit repeatedly

in Play mode to select “REPEAT ON.”

• Playback repeats when tape end is reached or
an unrecorded portion longer than 30 seconds is
detected.
• For repeat play in disc mode, see pages 54-57.

To quickly return to a specific tape counter

location.

4 Press STOP.

3 Continue to record, playback etc.

2 Press COUNTER RESET at the

desired position to reset to “0:00:00.”

1 Press DISPLAY during playback to

display the Counter.

5 Press CM/ZERO in Stop mode to

start ZERO SEARCH.

• Unit will go into FF or REW mode and stops
at the last point the Counter was set to
0:00:00.

Press CM/ZERO repeatedly to select skip

time in Playback mode.

By pressing the CM/ZERO button in

Playback mode you can skip over 1, 2, or 3

minutes of recorded tape as desired.

• No indication appears.

2 Press AUDIO repeatedly (each press

within 5 seconds) to select desired

mode.
• Select “HIFI (L/R),” to listen to a regular Hi Fi
Stereo recording. Select “HIFI (L)” or “HIFI
(R)” to listen only to the left or right channel of
a stereo recording. This is commonly used for
Karaoke, music on one channel and vocal on
the other. Select “NORMAL” for linear stereo
playback from a recorded tape with Hi Fi
disabled.
• This screen appears when you press AUDIO
during playback.

1 See the “Playback a Tape” section

on page 30 to playback the tape.

Choose the type of sound track for playback.

PLAY
REPEAT ON
PLAY 12:00PM
0:00:00
SLP
HIFI(L/R)
HIFI(L)
HIFI(R)
NORMAL

Repeat Play

Zero Search

Audio Mode for Playback

Commercial Skip

Notes
To turn “OFF”

Repeat above to select “REPEAT OFF.”

1st Press
1 min skip
OFF
2nd Press
2 min skip
3rd Press
3 min skip