22
30tWT
D.ZOOM
2
1
MENU
PUSH
SHUTTER/IRIS/VOL/JOG
12
PHOTO
SHOT
2
1, 3
2
OPTICAL IMAGE
STABILIZER
EIS EIS
MEGA

1 2

1, 3
2
FADE
Digital Zoom Function
This function is useful when you want to record close-up shots of subjects
located beyond a normal zoom range of 1k to 10k magnification. With the
digital zooming Function, you can select a magnification of 25k or 120k.
1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[D.ZOOM] >> [25t] or [120t].
≥25k: Digital zooming to 25k
≥120k: Digital zooming to 120k
2To zoom in or out, press the [W/T] zoom lever towards [T] or
towards [W].
≥As the magnification of digital zooming increases, the quality of image may
deteriorate.
Cancelling the Digital Zooming Function
Set [D.ZOOM] on the [CAMERA SETUP] Sub-menu to [OFF].
≥For other notes, see page 60.
~~~~~~~~~~~~~~~~~~~~~~~~
Optical Image Stabilizer Function
If you are recording in unstable situations and the Palmcorder is shaky, you
can use this function to correct for camera shake in these images.
≥If the Palmcorder shakes too much, this function may not be able to
stabilize images.
1Press the [OPTICAL IMAGE STABILIZER] Button until the
[EIS] Indication 1 appears.
2Press the Recording Start/Stop Button or [PHOTO SHOT]
Button to start recording.
MEGA EIS (Optical Image Stabilizer) Function
This function increases the effect. We recommend using MEGA EIS (Optical
Image Stabilizer) Function when performing Card Photo Shot Function.
3Press the [OPTICAL IMAGE STABILIZER] Button repeatedly
until the [ EIS] Indication 2 appears.
≥For other notes, see page 60.
~~~~~~~~~~~~~~~~~~~~~~~~
Fade In/Out Functions
Fade In 1
Fade In brings out images and sounds gradually from a black screen at the
beginning of a scene.
1Hold down the [FADE] Button while the Palmcorder is set to
the Recording Pause Mode.
≥The image fades out gradually.
2When the image is completely gone, press the Recording
Start/Stop Button to start recording.
3Release the [FADE] Button about 3 seconds after starting
recording.
≥The image reappears gradually.
Fade Out 2
Fade Out causes images and sounds to disappear gradually, leaving a black
screen at the end of a scene.
1Hold down the [FADE] Button while recording.
≥The image fades out gradually.
2About 3 seconds after the image is completely gone, press
the recording Start/Stop Button to stop recording.
3Release the [FADE] Button.
≥For other notes, see page 60.
MEGA