64
≥If a blank (nothing recorded) Card is played, the screen
becomes white and the [NO PICTURE],
[NO MPEG4 DATA] or [NOVOICE DATA] Indication
appears depending on the mode selected.
≥If you attempt to play back if file recorded in a different
format or if file data is defective, the [k] Indication and the
[CARD ERROR] Indication could appear as a warning.
≥In the case of displaying memory images on a Multi
Screen, if there are 7 or more images, they cannot be
displayed all at once. Rotate the [PUSH] Dial or push the
Operation Lever towards [i] to display the next 6 still
pictures.
≥When the pictures recorded by another Palmcorder are
played back with this Palmcorder, the size of the pictures
may be different from the recorded size.
≥MPEG4 data or Voice data will not be output from DV
Terminal.
≥MPEG4 data cannot perform Cue/Review Playback, Slow
Motion Playback (forward direction and reverse direction),
Still Advance Playback (forward direction and reverse
direction) or Jog Playback.
≥During automatic copying tape pictures onto a card, the
remaining number of pictures that can still be recorded on
the Card is displayed. When it becomes [0], the Tape is set
to the Recording Pause Mode.
≥For the MPEG4 moving pictures recorded on the camera
other this camera, "k" may be displayed when they are
played back. If the [1] Button is pressed in this case, "!"
will be displayed for a few seconds and the next image will
be displayed.
≥For the still images recorded on the camera other this
camera, the mega-pixel image size may be displayed.
≥If an MPEG4 motion picture is played continuously for a
long time, the playback may stop in the midway and the
video camera may freeze while a still picture is being
displayed. Under the condition, press the [RESET] button.
ªVoice Power Save (l39)≥Voice Power Save Function automatically shuts off the
monitor to reduce the power consumption when no
operation is being performed in the Voice Recording Mode.
When [VOICE POWER SAVE] on the
[OTHER FUNCTIONS] Menu is set to [ON], the power
save function is activated, and the screen turns off in a few
seconds after operations, such as play or recording are
performed.
≥The Voice Power Saving Function is cancelled when any
operation is performed.
≥Do not forget to turn off the power.
ªSlide Show (l41)≥The playback time can be set from 5 to 99 seconds.
≥Perform the Slide Show Settings with your own
Palmcorder.
≥Depending on the File size, playback may take longer than
the set time.
≥When performing the Slide Show after the Titles are
displayed, the Titles disappear.
ªTitle Functions (l42)≥When the [STILL/MPEG4/VOICE] Selector is set to
[MPEG4] or [VOICE], Title Creation Function is not
possible.
≥If the [PICTURE SIZE] is set to [1488k1128], title cannot
be created.
≥Even if the contrast of the Title is adjusted, the portions
where there is little difference between light and dark and
where the boundary between light and dark is unclear may
not appear.
≥The Title may not appear well if something small is used for
it.
≥If you create an original title, the number of pictures that
can be recorded on the Memory Card decreases.
≥If the number of pictures that can be recorded on the
Memory Card is small, you may not be able to create an
original title in some cases.
≥When a title is displayed in VCR Mode, the title is not
output from the DV Terminal or Digital Still Picture
Terminal.
≥When the [TAPE/CARD] Selector is set to [CARD] and
[1488k1128] is selected for [PICTURE SIZE], titles are not
displayed.
≥When the [STILL/MPEG4/VOICE] Selector is set to
[MPEG4] or [VOICE], Title In Function is not possible.
ªDPOF setting (l44)≥The number of prints can be set from 0 to 99.
≥Perform DPOF setting on the Palmcorder you are using.
≥It may take some time to verify the DPOF setting. Pleas e
wait until the [ACCESS] Lamp goes off.
ªUsing a Card in a Personal Computer≥To erase pictures that you recorded on the Card by using
the Palmcorder, be sure to erase them on the Palmcorder,
not on the computer.
≥You may not be able to properly play back or search the
images on the Palmcorder after editing the recorded data
or changing the image data on a personal computer.