38
ªRecording the Moving Pictures (MPEG4)
You can record moving pictures for e-mailing on a Memory Card. The
recorded data can be also played back on Windows Media Player.
Recording from the Palmcorder Lens (Camera Mode)
1Slide the [TAPE/CARD] Selector to [CARD].
2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3Press the Recording Start/Stop Button.
It takes 2 to 3 seconds to start recording.
During recording, the [ ] Indication appears and is lit in red.
The maximum continuous recording time is 60 minutes.
The Palmcorder will automatically stop recording when the relevant
time listed above has elapsed.
When Remaining Time Indication becomes [R:0h00m],
[NO SPACE LEFT] Indication appears. Recording may not be started.
The shutter speed is adjustable within the range of 1/30 to 1/500 while
recording moving pictures (MPEG4).
The picture size of the moving picture (MPEG4) is set to be [176k144].
When attaching to email, we recommend the picture size to be less than
1MB (about 1 minute length).
The following functions are disabled.
Digital Zoom (l22)
Cinema Function (l23)
Digital Effect Functions (l28)
Title In/Creation (l42)
Fade In/Out Function (l22)
Recording from a Cassette (VCR Mode)
1
11
1Slide the [TAPE/CARD] Selector to [CARD].
2
22
2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3
33
3Start playback and press the Recording Start/Stop Button at
the desired scene.
Recording from other equipment (VCR Mode)
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3
Input the image from other equipment then press the
Recording Start/Stop Button at the desired scene.
Maximum recording time on the supplied Card (16MB)
Approximately 15 minutes
The video resolution of the camera is reduced when making an MPEG4
recording. This is done in order to optimize the image quality in MPEG4
recordings, and does not reflect a problem with the software or hardware.
For other notes, see page 63.
ªRecording Voice (Voice Recording Function)
You can record voice data on a Memory Card.
1Slide the [TAPE/CARD] Selector to [CARD].
2Slide the [STILL/MPEG4/VOICE] Selector to [VOICE].
3Press the Recording Start/Stop Button.
Voice from built-in microphone is recorded.
It takes 2 to 3 seconds to start recording.
The recorded file is automatically locked (to prevent accidental
erasure).
Voice from external microphone connected to the microphone jack can
also be recorded.
During recording, the [ ] Indication appears and is lit in red.
If a card is not inserted, the Indication flashes in red.
When Remaining Time Indication becomes [R:0h00m],
[NO SPACE LEFT] Indication appears. Recording may not be started.
For other notes, see page 63.
MPEG
4
MPEG
4
VOICE
R:0h20m
MPEG4