7
3
1
CAMERA
VCR
CARD P.B.
MODE
ON
OFF

5, 6

1
2
4
6
4
5
CAMERA
VCR
CARD P.B.
MODE
ON
OFF

7

7
POWER
POWER
CAMERA
VCR
CARD P.B.
MODE
ON
OFF
POWER
OPEN/EJECT
2
PUSH
TO CLOSE
3
Quick Guide
1Charge the Battery. (l12)
≥Connect the AC Cable to the AC Adaptor and AC wall outlet.
≥Attach the Battery to the AC Adaptor. (This will start the charging
process.)
≥When the Charge Lamp [CHARGE] goes off, the Battery is fully
charged.
≥Since the Battery will not be charged when the DC Cable is connected
to the AC Adaptor, disconnect it.
2Attach the Charged Battery to the Palmcorder. (l12)
≥Attach the battery after tilting the Viewfinder upward.
3Turn the Palmcorder on. (l14)
≥Slide the 1 Switch to [ON]. (The [CAMERA] Lamp lights up.)
4Insert the Cassette. (l13)
≥Slide the 2 lever to the right and pull down to open the Cassette
compartment cover.
≥Insert the Cassette.
≥Press the [PUSH/TO CLOSE] 3 to load the Cassette.
≥Close the lower compartment Cover.
5Start recording. (l20)
≥Press the 4 Button. (Recording starts.)
≥Press the 4 Button again to pause the recording.
To watch the Playback Picture
6Switch to the VCR Mode, rewind the tape, and play the tape
back. (l30)
≥Slide the 5 Switch to VCR mode. (The [VCR] Lamp lights up.)
≥Push the 6 Lever towards [6]. (Rewind the tape.)
≥Push the 6 Lever towards [1]. (Playback starts.)
≥Push the 6 Lever towards [∫]. (Playback stops.)
7Turn the Palmcorder off. (l14)
≥Set the 7 Switch to [OFF].