Panasonic PV-GS300 operating instructions To disconnect USB cable safely, Double click

Models: PV-GS300

1 88
Download 88 pages 19.4 Kb
Page 60
Image 60

With a PC

To disconnect USB cable safely

If USB cable is disconnected while the computer is on, error dialog box may appear. In such a case click [OK] and close the dialog box. By following the steps below you can disconnect the cable safely.

1 Double click the

icon in task tray.

Hardware disconnect dialog box appears.

2Select [USB Mass Storage Device] and click [Stop].

3Verify [Matshita DVC USB Device] is selected and click [OK].

You can safely disconnect the cable.

Note on the driver name displayed

The driver name displayed will differ depending on your OS, operating environment and the mode of the Camcorder.

Make sure Camcorder’s Card Access Lamp is off and disconnect the cable. Also, the icon will not be displayed when in Tape Recording Mode or Tape Playback Mode.

CAUTION:

If you disconnect the USB cable while the Card Access Lamp is on, it may damage the Card data.

If the above operation is not performed correctly, when data is copied from the personal computer to an SD Memory Card, the copied data may be damaged.

When the following operations are performed, the same results will occur as when the USB cable is incorrectly removed (above). Therefore, it is imperative that the above operation is completed before proceeding.

When SD Memory Card is removed.

When Camcorder power is turned OFF.

OFF

ON

When Mode Dial is turned to change modes.

When using on Macintosh

Drag the [NO_NAME] or [Untitled] disk icon to the [Trash], and then disconnect the USB connection cable.

If you no longer need software or driver (Uninstall)

The screens may vary with the type of OS.

1Select [start] (>> [Settings]) >>

[Control Panel], select the software or the

driver from [Add/Remove Programs] to uninstall.

Uninstalling steps may vary depending on the OS. Please refer to the user manual of your OS.

Notes

Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Intel® and Pentium® are the registered trademarks or trademarks of the Intel Corporation.

Apple, Mac OS, iMovie/iMovie HD, FireWire are either registered trademarks or trademarks of Apple Computer, Inc. in the United States and/ or other countries.

All other names, company names, product names, etc. in these instructions are the trademarks or registered trademarks of their

respective corporations.

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

The names of the products you are using may differ from the names given in the text. Depending on the operating environment and other factors, the contents of the screens used in these instructions may not necessarily match what you will see on your screen.

60

LSQT0974

Page 60
Image 60
Panasonic PV-GS300 To disconnect USB cable safely, If you no longer need software or driver Uninstall, Double click