Panasonic PV-GS300 To start Quick Movie Magic or MotionDV Studio, Click Update Driver

With a PC

ªTo start Quick Movie Magic or

MotionDV STUDIO

If you wish to capture data from a tape, set the Camcorder to Tape Playback Mode and insert the tape.

If you wish to capture images from the lens of the Camcorder, set the Camcorder to the Tape Recording Mode and remove the tape and the card. (MotionDV STUDIO only)

About the PDF operating instructions for Quick Movie Magic/MotionDV STUDIO

For details on how to use the software applications, read the help file.

1Set [start] >> [All Programs (Programs)] >> [Panasonic] >> [Quick Movie Magic 1.0E] or [MotionDV STUDIO 5.6E LE for DV] >> [Manual (PDF format)].

≥Start Quick Movie Magic/MotionDV STUDIO and select [Help] >> [Help] from the menu to

display the help file.

≥You will need Adobe Acrobat Reader 5.0 or later to read the PDF operating instructions.

With USB connection cable (supplied)

OS:

Windows XP SP2

Windows 2000 SP4

≥The personal computer should be compatible with USB 2.0 Hi-Speed.

Confirmation before connection (for Windows XP/2000)

When you connect the personal computer and the Camcorder with the USB connection cable and then use Quick Movie Magic or MotionDV STUDIO on Windows XP SP2 or Windows 2000 SP4, check the driver of the USB host controller.

≥It is required to use the driver for which [Microsoft] is displayed on [Driver Provider] in

[Driver] tab.

1Select [start] >> [Settings] >> [Control Panel] to start [System].

≥[System Properties] is displayed.

2Click [Hardware] tab and then click [Device Manager] then [Universal Serial Bus Controller].

3Right-click [Enhanced Host Controller] and then select [Properties].

≥The indication [Enhanced Host Controller] is changed as [EHCI] depending on the host controller you use.

4Click [Driver] tab to check the description on [Driver Provider].

≥If [Microsoft] is displayed on [Driver Provider], the confirmation procedure is completed.

If a description other than [Microsoft] is displayed

≥Update the driver with the following procedure.

1Click [Update Driver...].

2Check [Install from a list or specific location (Advanced)] and then click [Next].

≥When your OS is Windows 2000, click [Next] after [Update Device Driver Wizard] appears.

3(For Windows XP Users)

Check [Don’t search. I will choose the driver to install] and then click [Next].

(For Windows 2000 Users)

Check [Display a list of the known drivers for this device so that I can choose a specific driver] and then click [Next].

58

LSQT0974