Recording still pictures onto a card Photoshot

Record mode

Recording still pictures onto a card (Photoshot)

≥Set to Card Recording Mode.

≥The lens cover opens automatically.

1Press the [PHOTO SHOT] button halfway in order to adjust focusing. (For auto focusing only)

≥If you set [O.I.S.] to [ON], then the image stabilizer function will be more effective.

([ MEGA (MEGA Optical image stabilizer)] will

be indicated.)

≥The iris/gain value is fixed and this Camcorder focuses on the subject automatically.

PHOTO SHOT

1Shutter chance mark

± (The white lamp flashes.):

Focusing

¥ (The green lamp lights up.): When in focus

No mark: When focusing is unsuccessful ≥The shutter chance mark is indicated as follows when the [PHOTO SHOT] button is not pressed halfway. Please use it as a guide for recording.

¥(The green lamp lights up.):

When in focus and a good picture can be recorded

±(The white lamp lights up.): Almost in focus

2Focus area

2Press the [PHOTO SHOT] button fully.

ªTo record still pictures clearly

≥When zooming in on the subject with a magnification of 4k or higher, it is difficult to

reduce the slight shaking from holding the Camcorder by hand. We recommend decreasing the zoom magnification and approaching the subject when recording.

≥When recording still pictures, hold the Camcorder firmly with your hands and keep your arms stationary at your side so as not to shake the Camcorder.

≥You can record stable pictures without shaking by using a tripod and the remote control.

≥For the number of still pictures to be recorded on a card, refer to -78-.

≥The moving picture and sound cannot be recorded.

≥While data are recorded on a card, do not operate the mode dial.

≥When the access lamp is lit, do not insert or remove a card.

≥Another product may degrade or not play back data recorded on this Camcorder.

≥If set [PICT.QUALITY] >> [ ], mosaic-pattern noise may appear on a playback image