13
Getting Started
Using MENU Mode
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA or VCR.
1Press MENU for MENU mode.
The CAMERA or VCR MENU screen (see below
left) appears when Menu mode is entered.
2Press UP or DOWN to highlight the
desired menu item.
3Press M.FOCUS to set selection.
4Press MENU to exit.
Note:
• The Menu mode is canceled if UP/DOWN, M.FOCUS,
or MENU are not pressed within 5 minutes when Self
Demo mode is off with no cassette tape and/or battery
inserted.
• The Menu mode is canceled if UP/DOWN, M.FOCUS,
or MENU are not pressed within 30 seconds when
Self Demo mode is on with no cassette tape and/or
battery inserted.
1
2
3
4
5
6
7
8
9
10
VCR Mode Menu Screen
Camera Mode Menu Screen 1REC MODE (page 17).
Change to desired tape speed, SP/SLP.
2SHUTTER (page 26).
Select desired shutter speed.
3LCD BRIGHT (pages 17, 20).
LCD BRIGHT SETTING sub menu is displayed.
Adjust LCD monitor brightness level.
4DIGITAL EFFECTS (pages 24, 27~30, 33, 39).
DIGITAL EFFECTS sub menu is displayed.
To select DIGITAL ZOOM, DIGITAL WIPE,
MAGICPIX, MOTIONSENSOR, or FADE/
FILTER.
5PROGRAMMED REC (page 19).
Camcorder starts and stops recording at a
preset time.
6DISPLAY SET (pages 46, 47).
DISPLAY SET sub menu is displayed.
To select DISPLAY or MODE SELECT.
7CLOCK SET (pages 14, 15).
CLOCK SET sub menu is displayed.
Set the Date and Time.
8STAND-BY RELEASE (page 18).
ON : Enables quick resumption of recording
from Stand-by mode.
9LIGHT MODE (page 16).
OFF/ON
: Light can be set ON or OFF.
OFF/ON/AUTO : Light can be set ON, OFF, or AUTO.
10 SELF DEMO (page 7).
ON : SELF DEMO screen is displayed.
3
6
7
1, 2, 3, 4