Panasonic PV-V4525S warranty Review, Replace, or Clear Program Cancel a Timer Recording

or

Timer Recording

Timer Recording

1 Press PROG* to display program screen.

2 1		-- --:--		--:--	--	--	1) Press	.		Example
										Today
	P DT START			STOP	CH	SPD
	3	-- --:--		--:--	--	--	2) Set record DATE,
	2	-- --:--		--:--	--	--
	4	-- --:--		--:--	--	--	press	to select:
	SELECT :			SET :			1~31= one time,
							or DAILY= Monday~Friday,
	END		: PROG
							or WEEKLY= same time
							each week (see right).
							3) Set remaining items,
							press to set START/ STOP times, CH (channel) or
							LINE input (p. 9 of Advanced Operations book), and
							tape speed (p. 3).
							Then press		to select.
							Press PROG to end programming.
3	1	13	2:00p	3:20p	02	SLP	To Enter More Programs
	P DT START			STOP	CH	SPD
							Press	to select and press to set an unused program.
	2	-- --:--		--:--	--	--
	3	-- --:--		--:--	--	--	Then repeat step 2. Or, press PROG to exit.
	4	-- --:--		--:--	--	--
			SET COMPLETED
	CANCEL : ADD/DLT
	SELECT :			SET :
	END		: PROG

4Press POWER off to set the timer recording. (“TIMER” lights on Multi Function Display.)

Review, Replace, or Clear Program Cancel a Timer Recording

(Recording is not in progress)

a Press PROG

to display program screen.

b	P DT START			STOP	CH	SPD	Press	to select
	1	13	2:00p	3:20p	02	SLP	desired program.
	2	14	7:00p	7:30p	10	SP
	3 -- --:--			--:--	--	--
	4 -- --:--			--:--	--	--
	CANCEL : ADD/DLT
	SELECT :			SET :
	END		: PROG
c To Replace program...
	P DT START			STOP	CH	SPD	1) Press	to display.
	1 13		2:00p	3:20p	02	SLP
	2 14		7:00p	7:30p	10	SP	2) Repeat Step 2
	3 -- --:--			--:--	--	--
	4 -- --:--			--:--	--	--

		(above) to set new
SELECT :	SET :	programs.
EXIT : PROG

To Clear program...

P DT START			STOP	CH	SPD	Press ADD/DLT.
1	--	-- --:	-- --:	--	--
2	14	7:00p	7:30p	10	SP
3	--	--:--	--:--	--	--
4	--	--:--	--:--	--	--
SELECT :			SET :
END		: PROG

(Recording is in progress)

Press POWER and then STOP within 10 seconds to cancel the Timer Recording.

(The TIMER indicator goes out on Multi Function Display.)

d Press PROG to end the programming.

Notes

•If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must be set to the Cable Box output channel and your Cable Box must be manually set to the desired channel. The Cable Box must be left on.

•If a power interruption occurs while programming the timer, the timer program(s) may be canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears on-screen, please re-enter the timer programs.

Important notes when using DSS receiver

•When recording programs via DSS receiver, DSS receiver must be left on.

•When recording programs via an antenna or cable, DSS receiver must be turned off.

- 6 -