60
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Check the following points once again if you are having trouble with your unit.

Before Requesting Service

PROBLEM CORRECTION Page

No power
Completely insert Power Plug into an AC outlet. 13
Set POWER button to ON. 11-12
Power turns itself off...
Auto power-off (shut off) occurs after about 5 min. in DVD mode
with no operation, or if there is no broadcast signal in TV or
Playback mode. Turn the power back on.
37-38
No picture or sound...
Make sure your antenna system (TV or CABLE) is correctly set. 14
Completely insert Power Plug into an AC outlet. 13
Set POWER button to ON. 11-12
Poor picture with
normal sound...
Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in
the SET UP Video Adjustment. 28-29
Poor sound with normal
picture... Adjust VOLUME control. 22
Poor TV reception... Adjust SHARPNESS and PICTURE controls in the SET UP Video
Adjustment. 28-29
No color or poor color... Adjust TINT and COLOR controls in the SET UP Video
Adjustment. 28-29
Ghost (multiple)
images... Install a directional antenna. 14
TV programs cannot
be watched... Make sure the selected channel is in unit’s memory. 19
Unit cannot be
controlled...
Aim Remote directly at the remote sensor on the unit. Avoid any
object blocking signal path. 12
Inspect the remote batteries. 8
Exposing unit remote sensor to direct fluorescent or outdoor light
may cause signal interference. 12
ACTION, PLAY,
SELECT, SET
POWER, etc. buttons
cannot be selected...
Press TV for TV mode. 12
Press DVD for DVD mode. 12
Check remote batteries. 8

Power Monitor Remote Control