27
Playback procedure
6
Press OPEN/CLOSE or
PLAY.
The disc tray closes auto-
matically.
The TV-screen,
changes
to “” and then playback
commences.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
1Press DVD on the remote
control to select DVD
mode.
Press OPEN/CLOSE on
the unit or the remote con-
trol.
The disc tray will open.
2Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
3
Press / or /to make a selection.
4
Press ENTER.
• Title is selected and play commences.
5
Press STOP to end playback.
•The unit memorizes the stopped point, depending on the
disc. “” appears on the screen. Press PLAY to resume
playback (from the scene point).
•If you press STOP again or unload the disc (“
” appears
on the screen.), the unit will clear the stopped point.
7Press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press OPEN/CLOSE then press
POWER.
The disc tray closes and unit turns off.
NOTES:
•If a non-compatible disc is loaded, “In-
correct Disc”, “Region Code Error” or
“Parental Error” will appear on the TV
screen according to the type of loaded
disc. If these appear, check your disc
again (see pages 9 and 38).
•Some discs may take a minute or so to
start playback.
•When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the
unit, “” will appear on the display for
about 3 seconds and then “No Disc” or
“Incorrect Disc” will be displayed.
•Some playback operations of DVDs
may be intentionally fixed by software
producers. Since this unit plays DVDs
according to the disc contents the soft-
ware producers designed, some play-
back features may not be available. Also
refer to the instructions supplied with the
DVDs.
5E90501A P24-32 21/4/03, 11:57 PM27