Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to the TV/DVD is depend- ent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

Using an Audio Amplifier

Rear of TV/DVD

Amplifier

Audio (L) Output

To Audio (R) Input

To Audio (L) Input

 

Audio (R) Output

AUDIO cord (not supplied)

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as shown below.

Rear of TV/DVD

Front

Speaker

TV/DVD Subwoofer (Right)

Front

Speaker

(Left)

Coaxial Digital

Audio Output

Coaxial digital cable (not supplied)

To Coaxial Digital Audio Input

AV Amplifier with built-in digital surround decoder as listed above

Center Speaker

Surround

Surround

Speaker (Left)

Speaker

 

(Right)

*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.

*“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

NOTES:

When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.

When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

42

Page 42
Image 42
Panasonic PV 9D53 manual Connections to other equipment, Using an Audio Amplifier, Rear of TV/DVD