Panasonic PV DF2004 manual Tape Operation, Index Search, Search System is, To cancel, press PLAY

Tape Operation

DISPLAY	NUMBER
	keys
ACTION
SELECT	SET
▲▼◄►
STOP	PLAY
	FF / SLOW+
REW/SLOW-
	CM / ZERO
SEARCH
AUDIO
	COUNTER
	RESET
	PLAY / REPEAT

Search System is ...

Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings.

Index Search

Go directly to the desired recording.

1Press SEARCH in Playback or Stop mode to display INDEX SEARCH screen, and then press NUMBER keys to select the recording number.

INDEX SEARCH

ENTER INDEX NUMBER :1

USING 1-9 KEYS

FORWARD SEARCH :FF

REVERSE SEARCH :REW

EXIT :SEARCH

2 Press FF or REW to start search.

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

1 2 3 4 5 6 7

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

1 2 3 4 5 6 7

NOTE: ↓ indicates start points of each recording.

Note

•If Index Search is started very close to an index mark, that index mark may not be counted in the search.

3Play begins at search end. To search forward or back 1 index, press FF or REW while screen below is displayed (10 seconds).

INDEX SEARCH

FORWARD SEARCH :FF

REVERSE SEARCH :REW

To cancel, press PLAY.

32
	For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo