Panasonic PV DF2704, PV DF2004 Repeat Play, Audio Mode for Playback, Zero Search, Commercial Skip

Repeat Play

Set to see a recording over and over.

PLAY

REPEAT ON

To turn “ON”

Press PLAY/REPEAT on the unit repeatedly in Play mode to select “REPEAT ON.”

To turn “OFF”

Repeat above to select “REPEAT OFF.”

Notes

•Playback repeats when tape end is reached or an unrecorded portion longer than 30 seconds is detected.

•For repeat play in disc mode, see pages 54-57.

Audio Mode for Playback

Choose the type of sound track for playback.

1See the “Playback a Tape” section on page 30 to playback the tape.

2Press AUDIO repeatedly (each press within 5 seconds) to select desired mode.

•Select “HIFI (L/R),” to listen to a regular Hi Fi Stereo recording. Select “HIFI (L)” or “HIFI (R)” to listen only to the left or right channel of a stereo recording. This is commonly used for Karaoke, music on one channel and vocal on the other. Select “NORMAL” for linear stereo playback from a recorded tape with Hi Fi disabled.

•This screen appears when you press AUDIO during playback.

HIFI(L/R)

HIFI(L)

HIFI(R)

NORMAL

VCR Operation

Zero Search

To quickly return to a specific tape counter location.

1Press DISPLAY during playback to display the Counter.

2Press COUNTER RESET at the desired position to reset to “0:00:00.”

PLAY 12:00PM

0:00:00

SLP

3Continue to record, playback etc.

4Press STOP.

5Press CM/ZERO in Stop mode to start ZERO SEARCH.

•Unit will go into FF or REW mode and stops at the last point the Counter was set to 0:00:00.

Commercial Skip

By pressing the CM/ZERO button in Playback mode you can skip over 1, 2, or 3 minutes of recorded tape as desired.

Press CM/ZERO repeatedly to select skip time in Playback mode.

• No indication appears.

1st Press	2nd Press
1 min skip	2 min skip
OFF	3rd Press
	3 min skip

33