Initial Setup (Ready to Play)

Please make all cable or antenna connections before powering on.

Initial Setup (Ready to Play)

Press TV/VCR on the remote for TV-VCR mode.

1 Plug the unit power cord into an AC wall outlet.

Press POWER* on the remote or unit. The unit

2 comes on and auto channel and clock set starts.

CH AUTO SET PROCEEDING

If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS receiver, it must be turned off.

TV/VCR

POWER

EJECT

ACTION

SELECT

SET

AUTO CLOCK SET

PROCEEDING

CANCEL : PRESS STOP KEY

Settings are made automatically. When setup

3 is done, this screen appears.

2/ 6/2003 THU 12: 00PM

DST : ON

SETT I NG : CH 10

AUTO CLOCK SET

COMPLETED

If AUTO CLOCK SET IS INCOMPLETE screen appears, set the clock using MANUAL CLOCK SET procedure on next page.

AUTO CLOCK SET

I S I NCOMPLETE

PLEASE SET CLOCK BY

PRESSING ACT I ON KEY

STOP

Notes

Function buttons are inoperative during Initial Setup.

To remove a cassette during Auto Set, press EJECT twice on the remote or STOP twice on the unit. In this case, settings must be made manually. (See pages 16-17.)

Depending on conditions, Auto Clock Set may take longer than 30 minutes. If so, press STOP to stop setup and perform settings manually. (See pages 16-17.)

14

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

Page 14
Image 14
Panasonic PV DM2793, PV DM2093 Initial Setup Ready to Play, TV/VCR Power Eject Action Select SET, Stop